Table 4-5 Pin assignments of an optical fiber
Local End Terminal Signal
Direction
Remote End Terminal
Optical interface Tx terminal -> Optical interface Rx terminal
Optical interface Rx terminal <- Optical interface Tx terminal
Fiber Selection Criterion
Table 4-6 lists the criteria for selecting optical fibers. Table 4-7 lists common optical connectors.
Table 4-6 Fiber selection criterion
Parameter Criterion
Length Survey result
Single mode or
multimode
Optical module type
l The optical transmitting module of the multi-mode is connected to
the multimode fiber.
l The optical transmitting module of the single-mode is connected to
the single mode fiber.
NOTE
If the optical fiber jumper is used, the connector connected to the device must be
the LC/PC connector, and the connector connected to the remote end must be of
the same type as the remote end interface.
Connector shape
l Cube: SC/PC, LC/PC, and MTRJ/PC
l Column: ST/PC and FC/PC
Table 4-7 Common optical connectors
SC/PC optical connector
LC/PC optical connector
FC/PC optical connector
MTRJ/PC optical connector
Quidway S3700 Series Ethernet Switches
Hardware Description 4 Cables
Issue 03 (2012-07-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
Comments to this Manuals