Huawei ECHOLIFE HG520C User Manual download pdf (Page 12)

2.4

Getting Started

To power on the HG520c, press the power button on the side panel of the HG520c.

After you power on the HG520c, the ADSL indicator blinks (for less than three

minutes), which indicates that the HG520c is being activated. Later, the ADSL

indicator turns solid on. The POWER indicator is also solid on, which indicates that the

HG520c is working properly.

3 Setting the Network-Access Parameters

By configuring the HG520c and your computer, you can choose any of the following

methods to surf the Internet:

Accessing the Network Through the Embedded PPP Dial-Up Software on the

HG520c

Accessing the Network Through the PPP Dial-Up Software on Your Computer

3.1

Accessing the Network Through the

Embedded PPP Dial-Up Software on the HG520c

If you select this method for accessing the network, the HG520c starts to set up a

dial-up connection automatically after the startup. You can access the network after you

power on your computer. You do not need to install any special dial-up software on

your computer or perform dial-up operations on your computer. To configure the

HG520c and your computer for the network access, do as follows:

Step 1

1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1

in the address bar, and then press Enter.

2. In the displayed dialog box, enter the user name and the password, and

then click OK.

By default, both the user name and the password are admin. After the user name and

the password are verified, you can access the Web-based configuration utility.

Step 2

Enable the embedded dial-up function.

1. In the navigation tree on the left of the Web-based configuration utility,

choose Basic > WAN Setting.

2. Select a PVC number, such as 1, from the PVC drop-down combo box.

3. Enter the VPI and VCI that are provided by the network operator in the

VPI and VCI text boxes.

1 ... 11 12 13 ... 25

No comments

Huawei ECHOLIFE HG520C User Manual Page 12