Huawei S5700-28C-SI Installation Guide download pdf (Page 47)

Display Mode Status Description

Blinking green and orange

alternately

The interface cannot provide

power to PDs. The possible

reasons including:

l The power of a connected PD

exceeds the interface's

powering capability or upper

power supply threshold.

l The power provided by the

switch has reached the

powering capability of the

switch.

l The PoE power function is not

enabled on the interface in

manual power-management

mode.

Stack

Off The stack ID of the member

switch is not the number of the

interface in the off state.

Green The device is a not a command

switch:

l If the indicator of an interface

is steady on, the number of this

interface is the stack ID of the

device.

l If the first nine interface

indicators of the device are

steady on, the stack ID of the

device is 0.

Blinking green

The device is a command switch:

l If the indicator of an interface

blinks, the number of this

interface is the stack ID of the

device.

l If the first nine interface

indicators of the device blink,

the stack ID of the device is 0.

2.6 S6700 Indicator Description

This section describes the indicators on the S6700 front panel.

Indicators of S6700 Switch

In the following description, the indicators of S6700-24-EI are described as an example.

S3700&S5700&S6700 Series Ethernet Switches

Quick Start 2 Product Hardware Introduction

Issue 02 (2012-09-10) Huawei Proprietary and Confidential

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

Comments to this Manuals

No comments

Huawei S5700-28C-SI Installation Guide Page 47

Comments to this Manuals

Related products and manuals for Network switches Huawei S5700-28C-SI