Huawei S5700-28C-SI Installation Guide download pdf (Page 63)

Figure 5-4 Selecting the terminal type

Step 6 Press Enter. At the following command-line prompt, set an authentication password. The system

automatically saves the set password.

Please configure the login password (maximum length 16)

Enter Password:

Confirm Password:

NOTE

After the password for the user interface is set successfully during the first login, you must enter this

password for authentication when you relog in to the system in password authentication mode using this

user interface.

----End

Follow-up Procedure

If the prompt <Quidway> is displayed on the screen, it indicates that the Command Line Interface

(CLI) is displayed. In this case, you can enter commands to configure or manage the S3700/

S5700/S6700. For details on configuration procedures, see the following sections.

5.2 Example for Configuring to Manage the SwitchThrough

Telnet

S3700&S5700&S6700 Series Ethernet Switches

Quick Start 5 Logging in to the Device

Issue 02 (2012-09-10) Huawei Proprietary and Confidential

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69 70

No comments

Huawei S5700-28C-SI Installation Guide Page 63